- Weight capacity: 30 lbs.
- Tempered glass shelf pivots at the wall
- Holds DVD player, VCR, cable box, and satellite
Product Description
Component Shelf… More >>
OmniMount ECSB Component Shelf for CRT TVs & Video Accessories
Product Description
Component Shelf… More >>
OmniMount ECSB Component Shelf for CRT TVs & Video Accessories
Tags: accessories, Component, ECSB, OmniMount, Shelf, Video
This entry was posted on Thursday, July 15th, 2010 and is filed under Electronics. You can follow any responses to this entry through RSS 2.0. You can leave a response, or trackback from your own site.
Powered by Yahoo! Answers
#1 by Paul Waldman on July 15th, 2010
Quote
This is a great wall mount shelf. There aren’t a lot of 30 lb shelf mount speakers out there. I have Klipsch RS-62s that weigh in at 26 lbs each, and the shelves accomodate them. The down side is that one of the shelves was sent with screws that had no thread! Also you HAVE TO install thise into a stud, period! When you initially drill, make sure you find wood shavings as the drill bit comes out. When you install drill the other holes, MAKE SURE you measure from the ground to the top of the wall plate to assure the speakers will be at the same height. Also, make sure that before you do your drilling deep, LEVEL the plate using a LEVEL you can buy at any hardware store, so your speakers don’t tilt in one direction or the other. Make sure the top side is on TOP and put the plastic cover on BEFORE you attach the glass, and that the glass is faced so the rounded edge is in the front! Good Luck!
Rating: 4 / 5
#2 by (E) None Of The Above on July 15th, 2010
Quote
This shelf is quite attractive and easy to install. The depth of it is greater than I was imaging, so if you’re using it for a smallish item (like a DVD or cable box), it will stick out form the wall farther than you need.
Rating: 4 / 5
#3 by (E) None Of The Above on July 15th, 2010
Quote
This shelf is quite attractive and easy to install. The depth of it is greater than I was imaging, so if you’re using it for a smallish item (like a DVD or cable box), it will stick out form the wall farther than you need.
Rating: 4 / 5
#4 by James J. Macci on July 15th, 2010
Quote
This OMNIPOINT Glass component shelf was simple to install and strong enough for my VCR & Satellite Receiver. The shelf glass shelf is fixed to the support arm and the support arm can swivel left & right about 20 Degrees. The only downside is that the glass shelf and projection from my wall is a little large for my location. I wish OMNIMOUNT has several sizes of this model available. If so, then I missed seeing it. Not a problem. Have a strong drill to pre-drill the screw holes into the wall. All said, I am fully pleased with this item.
Rating: 5 / 5
#5 by A. Dobos on July 15th, 2010
Quote
The shelf does what it’s supposed to do, but if you’re installing where there’s no stud, be prepared for a headache. It’s possible, but you’ll need a couple trips to the hardware store for the right kind of anchors/mollies. I wouldn’t do jumping jacks on it, but it holds the TiVo nicely.
Would be nice if it also had a locking feature to stop the swivel. It tightens well, but not fully, so it swings if you bump it.
Rating: 3 / 5
#6 by ! MR. KNOW IT ALL ;-b on July 15th, 2010
Quote
I bought two of these shelves, one for my TiVo and the other for a DVD player. I was able to install them one above the other and they look great. The glass for the shelf is very thick and it would probably support a TV! The only thing I found odd was that that if was impossible to tighten the bracket so it would not move back and forth. It really isn’t a problem unless the shelf was in a high traffic area….which would not be a good idea anyway. Nice looking, well made and gets the job done easy.
Rating: 5 / 5
#7 by ! MR. KNOW IT ALL ;-b on July 15th, 2010
Quote
I bought two of these shelves, one for my TiVo and the other for a DVD player. I was able to install them one above the other and they look great. The glass for the shelf is very thick and it would probably support a TV! The only thing I found odd was that that if was impossible to tighten the bracket so it would not move back and forth. It really isn’t a problem unless the shelf was in a high traffic area….which would not be a good idea anyway. Nice looking, well made and gets the job done easy.
Rating: 5 / 5